Asus A7V8X-MX Bedienungsanleitung PDF herunterladen (Seite 40)

2-10

Chapter 2: BIOS Information

2.4.1 IDE Primary Master/Slave

IDE Secondary Master/Slave

IDE HDD Auto-Detection [Press Enter]

Press enter to automatically detect an IDE hard disk drive, if the hard drive is not

already detected. In cases of undetected HDDs, pressing enter will detect the HDD

and then open access to both the IDE Primary Master and Access Mode fields.

IDE Primary Master/Slave [Auto]

IDE Secondary Master/Slave [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection

is successful, the setup BIOS automatically fills in the correct values for the

remaining fields on this sub-menu. If automatic detection fails, this may be

because the hard disk drive is too old or too new. If the hard disk was already

formatted on a previous system, the setup BIOS may detect incorrect parameters.

In these cases, select [Manual] to manually enter the IDE hard disk drive

parameters. If no drive is installed or if you are removing a drive and not replacing

it, select [None]. Configuration options: [None] [Auto [Manual]

Access Mode [Auto]

The default [Auto] automatically detects an IDE hard disk drive. Select [CHS] in

coordination with the [Manual] setting of the IDE Primary Master in order to enter

the Hard Disk Drive values manually.

To auto-detect the

HDD’s size, head...on

this channel.

IDE Primary Master

IDE HDD Auto-Detection [Press Enter]

IDE Primary Master [Auto]

Access Mode [Auto]

Capacity 40020 MB

Cylinder 19158

Head 16

Precomp 0

Landing Zone 19157

Sector 255

Transfer Mode UDMA 2

Before attempting to configure a hard disk drive, make sure you have

the correct configuration information supplied by the drive

manufacturer. Incorrect settings may cause the system to fail to

recognize the installed hard disk.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 63 64

Keine Kommentare

Asus A7V8X-MX Bedienungsanleitung Seite 40