Asus M3N78 SE Bedienungsanleitung PDF herunterladen (Seite 28)

1-18

Chapter 1: Product introduction

1.9 Jumpers

1. Clear RTC RAM (CLRTC)

This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the

CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM

data. The onboard button cell battery powers the RAM data in CMOS, which include system setup

information such as system passwords.

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.

2. Remove the onboard battery.

3. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3

for about 5~10 seconds, then move the cap back to pins 1-2.

4. Reinstall the battery.

5. Plug the power cord and turn ON the computer.

6. Hold down the

<Del> key during the boot process and enter BIOS setup to

reenter data.

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default

position. Removing the cap will cause system boot failure!

You do not need to clear the RTC when the system hangs due to overclocking. For system

failure due to overclocking, use the CPU Parameter Recall (C.P.R) feature. Shut down and

reboot the system so the BIOS can automatically reset parameter settings to default values.

M3N78 SE

M3N78 SE Clear RTC RAM

2 2 3

Normal

(Default)

Clear RTC

CLRTC

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 61 62

Keine Kommentare

Asus M3N78 SE Bedienungsanleitung Seite 28