ASUS P5KPL-C/1600 1-29
4. Serial ATA connectors (7-pin SATA1 [red], SATA2 [black], SATA3 [red],
SATA4 [black])
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
P5KPL/1600
P5KPL/1600
SATA Connectors
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
SATA1
GND
RSAT
A_TXP2
RSAT
A_TXN2
GND
RSAT
A_RXN2
RSAT
A_RXP2
GND
SATA2
GND
RSAT
A_TXP4
RSAT
A_TXN4
GND
RSAT
A_RXN4
RSAT
A_RXP4
GND
SATA4
GND
RSAT
A_TXP3
RSAT
A_TXN3
GND
RSAT
A_RXN3
RSAT
A_RXP3
GND
SATA3
3. IDE connector (40-1 pin PRI_IDE)
This connector is for an Ultra DMA 100/66/33 signal cable. The Ultra
DMA 100/66/33 signal cable has three connectors: a blue connector for the
primary IDE connector on the motherboard, a black connector for an Ultra
DMA 100/66/33 IDE master device (optical drive/hard disk drive), and a gray
connector for an Ultra DMA 100/66/33 IDE slave device (hard disk drive).
If you install two hard disk drives, you must congure the second drive
as a slave device by setting its jumper accordingly. Refer to the hard disk
documentation for the jumper settings.
• Pin 20 on the IDE connector is removed to match the covered hole on the
Ultra DMA cable connector. This prevents incorrect insertion when you
connect the IDE cable.
• Use the 80-conductor IDE cable for Ultra DMA 100/66/33 IDE devices.
P5KPL/1600
P5KPL/1600
IDE Connector
PRI_IDE
Kommentare zu diesen Handbüchern