Asus P5P43TD PRO Bedienungsanleitung PDF herunterladen (Seite 55)

ASUS P5P43TD PRO 2-17

Legacy USB Support [Auto]

Allows you to enable or disable support for Legacy USB storage devices, including USB ash

drives and USB hard drives. Setting to [Auto] allows the system to detect the presence of

USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB

device is detected, the legacy USB support is disabled. Conguration options: [Disabled]

[Enabled] [Auto]

The following items may only appear when a USB storage device is plugged.

USB Mass Storage Device Conguration

USB Mass Storage Reset Delay [20 Sec]

Allows you to set the maximum time that the BIOS waits for the USB storage device to

initialize. Conguration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]

Emulation Type [Auto]

Allows you to set the emulation type. Conguration options: [Auto] [Floppy] [Forced FDD]

[Hard Disk] [CDROM]

2.5.5 PCI PnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.

The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA

devices, and setting the memory size block for legacy ISA devices.

Take caution when changing the settings of the PCI PnP menu items. Incorrect eld values

can cause the system to malfunction.

Plug and Play O/S [No]

When set to [No], BIOS congures all the devices in the system. When set to [Yes] and if you

install a Plug and Play operating system, the operating system congures the Plug and Play

devices not required for boot. Conguration options: [No] [Yes]

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 61 62

Keine Kommentare

Asus P5P43TD PRO Bedienungsanleitung Seite 55