Asus P5QC Bedienungsanleitung PDF herunterladen (Seite 59)

ASUS P5QC 2-33

9. Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch.

Connect one end of the chassis intrusion sensor or switch cable to this

connector. The chassis intrusion sensor or switch sends a high-level signal to

this connector when a chassis component is removed or replaced. The signal

is then generated as a chassis intrusion event.

By default , the pin labeled “Chassis Signal” and “Ground” are shorted with

a jumper cap. Remove the jumper caps only when you intend to use the

chassis intrusion detection feature.

10. Serial port connector (10-1 pin COM1)

This connector is for a serial (COM) port. Connect the serial port module

cable to this connector, then install the module to a slot opening at the back

of the system chassis.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 187 188

Keine Kommentare

Asus P5QC Bedienungsanleitung Seite 59