3-20 Chapter 3: BIOS setup
Configure SATA as [IDE]
set the item to [Compatible] or [Enhanced].
[IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives
as Parallel ATA physical storage devices.
the SATA hard disk drives.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advabced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features
that increases storage performance on random workloads by
Hard Disk Write Protect [Disabled]
[Enabled] Enable device write protection. This function will be effective only if
the device is accessed through BIOS.
[Disabled] Disable this function.
SATA Detect Time Out (Sec) [35]
Selects the time out value for detecting ATA/ATAPI devices from the following
options: [0] [5] [10] [15] [20] [25] [30] [35]
devices installed in the system. Select an item then press <Enter> if you want to
BIOS SETUP UTILITY
Main
Storage Conguration
SATA Conguraton [Enhanced]
Congure SATA as [IDE]
Hard Disk Write Protect [Disabled]
IDE Detect Time Out (Sec) [35]
Set [Compatible Mode]
when Legacy OS (i.e.
WIN ME, 98, NT4.0, MS
DOS) is used.
Set [Enhanced Mode]
when Native OS (i.e.
WIN2000, Win XP, Vista
is used.
Kommentare zu diesen Handbüchern