Asus P4T-F Bedienungsanleitung PDF herunterladen (Seite 36)

36 ASUS P4T-F User’s Manual

Connectors

3. H/W SETUP

3. HARDWARE SETUP

10) Fan Connectors (3 pin MAIN_FAN, CPU_FAN, PCI_FAN)

These connectors support cooling fans of 350mA (4.2 Watts) or less. Orientate

the fans so that the heat sink fins allow airflow to go across the onboard heat

sink(s) instead of the expansion slots. Depending on the fan manufacturer, the

wiring and plug may be different. The red wire should be positive, while the

black should be ground. Connect the fan’s plug to the board taking into consid-

eration the polarity of the connector.

NOTE: The “Rotation” signal is to be used only by a specially designed fan with

rotation signal. The Rotations per Minute (RPM) can monitored using a utility such

as ASUS PC Probe or Intel LDCM.

WARNING! The CPU and/or motherboard will overheat if there is no airflow

across the CPU and onboard heatsinks. Damage may occur to the motherboard

and/or the CPU fan if these pins are incorrectly used. These are not jumpers,

do not place jumper caps over these pins.

P4T-F

P4T-F 12-Volt Cooling Fan Power

MAIN_FAN

CPU_FAN

PCI_FAN

GND

Rotation

+12V

GND

Rotation

+12V

GND

Rotation

+12V

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 95 96

Keine Kommentare

Asus P4T-F Bedienungsanleitung Seite 36