Asus AP1720-E1 Bedienungsanleitung Seite 122

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 124
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 121
5-20
Chapter 5: Driver installation
5.5.4 Creating a RAID Volume
To create a RAID 0 volume:
1. Select the option 1. Create RAID Volume from the Main menu, then
press <Enter>. The Create Array menu appears.
[
HELP
]
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
can not contain special characters.
Intel(R) Integrated RAID for Serial ATA - RAID Configuration Utility
Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx
[
CREATE ARRAY MENU
]
Name: RAID_Volume1
Stripe Size: 64KB
RAID Level: RAID0(Striping)
Capacity: 37.2GB
 Create Volume
[ ]-Change
[TAB]-Next
[ESC] Previous Menu
[Enter]-Select
2. Type a name for your RAID volume using 1 to 16 characters (letters
and/or numbers, no special characters). Press <Enter>.
3. Use the Up and Down arrow keys to select the stripe size for the
RAID 0 array. Press <Enter> to make the selection.
The available values range from 8 KB to 128 KB. The default is 64
KB. Select a stripe value from the following suggestions depending
on your planned drive usage.
16 KB - low disk usage
64 KB - typical disk usage
128 KB - performance disk usage
4. Highlight Create Volume then press <Enter> to create the array.
Press Y when a confirmation message appears.
Are you sure you want to create this volume (Y/N)
5. Scroll down to option 4. Exit and press <Enter> to exit the RAID
configuration utility. Press Y when a confirmation message appears.
Seitenansicht 121
1 2 ... 117 118 119 120 121 122 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare