
ASUS BP5220/AS-D592 3-3
3.1.2 ASUS EZ Flash 2 utility
ASUS EZ Flash 2 allows you to update the BIOS without having to go through the
long process of booting from a oppy disk and using a DOS-based utility. The
EZ Flash 2 utility is built in the BIOS chip so it is accessible by pressing <Alt> +
<F2> during the Power-On Self-Test (POST).
To update the BIOS using EZ Flash 2:
1. Download the latest BIOS le for this motherboard from the ASUS website at
www.asus.com.
2. Save the BIOS le to a oppy disk or a USB ash disk, then restart the
system.
3. Launch EZ Flash 2 using either of the following methods.
(1) Press
<Alt> + <F2> during POST to display the following.
(2) Enter the BIOS setup program. Go to
Tools > EZ Flash 2 then press
<Enter>.
4. Press
<Tab> to locate the correct le. Press <Enter>.
When the correct BIOS le is found, EZ Flash 2 performs the BIOS updating
process and automatically reboots the system when done.
Note
ASUSTek EZ Flash 2 BIOS ROM Utility V3.25
Current ROM
Update ROM
A:
FLASH TYPE: MXIC 25L8005
PATH: A:\
BOARD: P5KPL-AM/PS
VER: 0003
DATE: 07/22/08
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Enter] Select or Load [B] Backup [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
Note
• This function supports devices such as USB ash disks and oppy disks
with
FAT 32/16
format and single partition only.
•
DO NOT
shut down or reset the system while updating the BIOS to prevent
system boot failure!
2. Copy the original or the latest motherboard BIOS le to the bootable oppy
disk.
Kommentare zu diesen Handbüchern