Asus D1T Bedienungsanleitung PDF herunterladen (Seite 45)

Using the Portable Desktop PC 4

Network Connection

Connect a network cable, with RJ-45 connectors on each end, to the modem/network port on the Portable

Desktop PC and the other end to a hub or switch. For 100BASE-TX speeds, your network cable must

be category 5 (not category 3) with twisted-pair wiring. If you plan on running the interface at 100Mbps,

it must be connected to a 100BASE-TX hub (not a 100BASE-T4 hub). For 10Base-T, use category 3, 4,

or 5 twisted-pair wiring. Duplex transfers (up to 200Mbps) is supported on this Portable Desktop PC

but requires connection to a switch with “duplex” enabled. The software default is to use the fastest

setting so no user-intervention is required.

Twisted-Pair Cable

The cable used to connect the Ethernet card to a host (generally a Hub or Switch) is called a straight-

through Twisted Pair Ethernet (TPE). The end connectors are called RJ-45 connectors, which are not

compatible with RJ-11 telephone connectors. If connecting two computers together without a hub in

between, a crossover twisted-pair is required.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50

Keine Kommentare

Asus D1T Bedienungsanleitung Seite 45