Asus Terminator 2 Barebone System T2-R Bedienungsanleitung PDF herunterladen (Seite 27)

ASUS Terminator 2 barebone system

2. Align the retention bracket with

the rails on the side of the CPU

fan.

3. Attach the retention bracket

hook into the retention module

hole.

2.5.3 Re-installing the CPU fan and heatsink

assembly

To re-install the CPU fan and heatsink assembly:

1. Position the CPU fan and

heatsink assembly on top of the

installed CPU.

4. Carefully press down the

locking lever on the other side

of the retention bracket.

5. Attach the locking lever hook

into the retention module hole

to secure the fan and heatsink

assembly in place.

6. Follow steps 2 to 5 to re-install

the second retention bracket.

7. Connect the CPU fan cable to the CPU fan connector on the

motherboard.

Do not forget to connect the CPU fan connector! Hardware monitoring

errors might occur if you fail to plug this connector.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 119 120

Keine Kommentare

Asus Terminator 2 Barebone System T2-R Bedienungsanleitung Seite 27