1EnglishGetting StartedThis Quick Setup Guide will help you get your motherboard up and running quickly. Refer to the Quick Reference Card included in
English10Troubleshooting10Power UpTurn on the power of the monitor, peripherals and system. If necessary, format your hard disk drive and install an
English2InstallationWARNING! Do not connect any power cable to live AC outlets until configuration and setup is complete.Install memory modules1. Unlo
3EnglishHeatsink with fan2SocketLeverCPUGoldtriangleSmall triangleInstall the CPU and heatsink with fan1. Unlock the socket by pressing the level side
English4Mount the motherboardNOTE: The following procedure applies to most standardchassis. Before you install the motherboard, study theconfiguration
5English4Install hard disk and floppy drives1. If installing two IDE hard disk drives on the same cable,set one device as “Master” and the other as “S
English65Connect drive signal cables1. Connect the floppy disk signal cable. Make sure the side of thecable with the colored stripe is plugged into pi
7EnglishLED and switch leads Install expansion cards1. Remove the slot covers from the chassis where youwish to install the expansion cards.2. Install
English8820-pin connector 4-pin connectorConnect the power supply cablesThe plugs from an ATX power supply are designed to fit the power connectors on
9English Connect the peripherals and accessories9ACPS/2SerialUSBLine OutLine inDVIMicIEEE1394ParallelPS/2S/PDIFMouseDigitalSpeakersPrinterMobileHDDFla
Kommentare zu diesen Handbüchern