Asus H61-PLUS Bedienungsanleitung PDF herunterladen (Seite 36)

2. Keyboard and USB device wake-up (3-pin KB_USBPWB)

This jumper allows you to enable or disable the keyboard and USB port 1~4 wake-up

feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer

by pressing a key on the keyboard or using a USB device. This feature requires an

ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding

setting in the BIOS. This jumper is for the rear USB ports.

3. USB device wake-up (3-pin USBPWF)

Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,

DRAM refreshed, system running in low power mode) using the connected USB

devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,

DRAM in slow refresh, power supply in reduced power mode).

• The USB device wake-up feature requires a power supply that can provide 500mA on

the +5VSB lead for each USB port; otherwise, the system would not power up.

• The total current consumed must NOT exceed the power supply capability (+5VSB)

whether under normal condition or in sleep mode.

H61-PLUS

H61-PLUS Keyboard and USB device wake-up

1 2

2 3

+5V

+5VSB

(Default)

KB_USBPWB

H61-PLUS

H61-PLUS USB device wake-up

2 3

+5V

(Default)

+5VSB

USBPWF

Chapter 1: Product introduction

1-24

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 83 84

Keine Kommentare

Asus H61-PLUS Bedienungsanleitung Seite 36