Asus P5S-VM Bedienungsanleitung PDF herunterladen (Seite 33)

ASUS P5S-VM User’s Manual 33

III. HARDWARE SETUP

Connectors

III. H/W SETUP

24. CPU/Chassis Cooling Fan Connectors (FAN, 3 pins)

These connectors support 3-pin cooling fans of 500mA (6W) or less with a mini-

mum of 3,500RPM. Orientate the fans so that the heatsink fins allow airflow to

go across the onboard heatsink(s) instead of the expansion slots. Depending on

the fan manufacturer, the wiring and plug may be different. The red wire should

be positive, while the black should be ground. Connect the fan’s plug to the

board taking into consideration the polarity of the connector. NOTE: The “Ro-

tation” signal is to be used only by a specially designed fan with rotation

signal. The Rotations per Minute (RPM) can be monitored using ASUS PC

Probe Utility.

WARNING! The CPU and/or motherboard will overheat if there is no airflow

across the CPU. Damage may occur to the motherboard and/or the CPU fan if

these pins are incorrectly used. These are not jumpers, thus, do not place

jumper caps over these pins.

P5S-VM 12-Volt Cooling Fan Power

GND

Rotation

+12V

GND

Rotation

+12V

CPU Fan Power

Chassis Fan Power

0 1

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 95 96

Keine Kommentare

Asus P5S-VM Bedienungsanleitung Seite 33