Asus P9D-C/4L e8581 Bedienungsanleitung

LSI Software RAID Conguration Utility

10LSI Software RAID Conguration Utility 8. Select Units from the Virtual Drive sub-menu then press <Enter>.9. Select the units for the virtua

1112. After setting the values of the selected virtual drives, select Accept from the menu then press <Enter>.13. The ARRAY SELECTION MENU dis

12LSI Software RAID Conguration Utility Using New CongurationWhen a RAID set already exists, using the New Conguration command erases the existing

134. Press <Space> to select the congurable array.5. Press <F10> to begin the conguration. The virtual drive information appears incl

14LSI Software RAID Conguration Utility 6. Select RAID from the Virtual Drive sub-menu then press <Enter>.7. Select the RAID level from the m

15Enabling DWC can improve the performance, but with the risk of data loss. When creating a RAID 0 set, proceed to step 12.10. When creating a RAID

16LSI Software RAID Conguration Utility 13. The ARRAY SELECTION MENU displays the congured virtual drives. Repeat steps 2 to 10 to congure the rem

174. Adding or viewing a RAID congurationYou can add a new RAID conguration or view an existing conguration using the View/Add Conguration comman

18LSI Software RAID Conguration Utility 3. Select all the drives required for the RAID set then press <F10> to congure array setting.4. Pres

196. Select RAID from the Virtual Drive sub-menu then press <Enter>.7. Select the RAID level from the menu then press <Enter>.8. Select

LSI Software RAID Conguration Utility E8581 First Edition August 2013Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved.No part of this manua

20LSI Software RAID Conguration Utility Enabling DWC can improve the performance, but with the risk of data loss. When creating a RAID 0 set, procee

2113. The ARRAY SELECTION MENU displays the congured virtual drives. Repeat steps 2 to 10 to congure the remaining available virtual drives or pres

22LSI Software RAID Conguration Utility 5. Initializing the virtual drivesAfter creating the RAID set(s), you must initialize the virtual drives. Yo

233. Press <F10> to start initialization. When prompted, select Yes from the Initialize? dialog box then press <Enter>.Initializing a vir

24LSI Software RAID Conguration Utility Using the Objects commandTo initialize the virtual drives using the Objects command1. From the Management Me

253. Select Initialize from the pop-up menu then press <Enter> to start initialization.4. When prompted, press the <Space> to select Yes

26LSI Software RAID Conguration Utility 6. Rebuilding failed drivesYou can manually rebuild failed hard disk drives using the Rebuild command in the

273. After selecting the drive to rebuild, press <F10>. When prompted, press <Y> to rebuild the drive.4. When rebuild is complete, press

28LSI Software RAID Conguration Utility 2. The screen displays the available RAID set(s) and prompts you to select the virtual drive to check. Press

293. When prompted, use the arrow keys to select Yes from the Consistency Check? dialog box then press <Enter>. A progress bar appears on scre

3This document provides instructions in setting up, creating, and conguring RAID sets using the LSI Software RAID Conguration Utility. It also shows

30LSI Software RAID Conguration Utility Using the Objects commandTo check data consistency using the Objects command:1. From the Management Menu, se

318. Deleting a RAID congurationTo delete a RAID conguration:1. From the Management Menu, select Congure > Clear Conguration then press <E

32LSI Software RAID Conguration Utility 2. When prompted, use the arrow keys to select the bootable virtual drive from the list, then press <Ente

3310. Enabling the Disk Write Cache (DWC)You may manually enable the RAID controller’s Disk Write Cache option after creating a RAID set to improve t

34LSI Software RAID Conguration Utility 5. Select View/Update Parameters and press <Enter> to display the Virtual Drive properties. 6. Select

353. Select Yes using the <Tab> key when asked if you have a driver disk, then press <Enter>. Main MenuDo you have a driver disk?Yes No4

36LSI Software RAID Conguration Utility 6. Select No when asked to load additional RAID controller drivers then press <Enter>.7. Follow the o

372. Red Hat® Enterprise Linux OS 6.xTo install the LSI MegaRAID controller driver when installing Red Hat® Enterprise Linux 6.x OS:1. Boot the

38LSI Software RAID Conguration Utility 6. Select No when asked to load additional RAID controller drivers then press <Enter>.7. Follow the o

39Preparing the Linux DriverEnsure that there is another computer with a Linux-based OS to create the RAID driver. When creating the RAID driver, you

4LSI Software RAID Conguration Utility II. Using the LSI Software RAID Conguration UtilityThe LSI Software RAID Conguration Utility allows you to

40LSI Software RAID Conguration Utility 3. Use the USB drive to provide the third-party driver during the OS installation. Press <F6>, select

415. Select Back and follow the onscreen instructions to nish the installation.4. On the following screen, select USB drive as the driver update me

42LSI Software RAID Conguration Utility

5C. Setting the RAID mode in BIOSYou must set the RAID mode in the BIOS Setup to be able to launch the RAID utilities before you can create a RAID se

6LSI Software RAID Conguration Utility 3. From the LSI Software RAID Conguration Utility Management menu, use the arrow keys to select an option th

73. Creating a RAID setThe LSI Software RAID Conguration Utility allows you to create a RAID 0, RAID 1, or RAID 10 set using two types of congurati

8LSI Software RAID Conguration Utility 3. Select all the drives required for the RAID set then press <F10> to congure the array setting.4. P

95. Press <F10> to begin the conguration. The virtual drive information appears including a Virtual Drive menu that allows you to change the