Asus P6X58D-E Bedienungsanleitung PDF herunterladen (Seite 74)

3-16 Chapter 3: BIOS setup

Chapter 3

DRAM READ to READ Delay(DD) [Auto]

Conguration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]

DRAM READ to READ Delay(DR) [Auto]

Conguration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]

DRAM READ to READ Delay(SR) [Auto]

Conguration options: [Auto] [4 DRAM Clock] [6 DRAM Clock]

DRAM WRITE to WRITE Delay(DD) [Auto]

Conguration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]

DRAM WRITE to WRITE Delay(DR) [Auto]

Conguration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]

DRAM WRITE to WRITE Delay(SR) [Auto]

Conguration options: [Auto] [4 DRAM Clock] [6 DRAM Clock]

3.5.13 CPU Voltage Control [Manual]

[Manual] Allows you to set a xed CPU voltage.

[Offset] Allows you to set the Offset voltage.

The following ten (10) items are adjusted by typing the desired values using the numeric

keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust the

value. To restore the default setting, type [auto] using the keyboard and press the <Enter>

key.

3.5.14 CPU Voltage [Auto]

Allows you to set the CPU VCore voltage. The values range from 0.85000V to 2.10000V*

with a 0.00625V interval.

• Refer to the CPU documentation before setting the CPU Vcore voltage. Setting a high

VCore voltage may damage the CPU permanently, and setting a low VCore voltage

may make the system unstable.

• The value [2.10000V] of the CPU Voltage item is supported only if the OV_CPU

jumper is enabled. Otherwise the maximum voltage supported is [1.70000V].

See CPU / DRAM Bus / QPI DRAM overvoltage setting on page 2-22 for details.

3.5.15 CPU PLL Voltage [Auto]

Allows you to set the CPU PLL voltage. The values range from 1.80V to 2.50V with a 0.02V

interval.

3.5.16 QPI/DRAM Core Voltage [Auto]

Allows you to set the QPI/DRAM Core voltage. The values range from 1.20000V to

1.90000V* with a 0.00625V interval.

The value [1.90000V] of the QPI/DRAM Core Voltage item is supported only if the

OV_QPI_DRAM jumper is enabled. Otherwise the maximum voltage supported is [1.70000V].

See CPU / DRAM Bus / QPI DRAM overvoltage setting on page 2-22 for details.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 127 128

Keine Kommentare

Asus P6X58D-E Bedienungsanleitung Seite 74