Asus P4T-F Bedienungsanleitung PDF herunterladen (Seite 57)

ASUS P4T-F User’s Manual 57

4. BIOS SETUP

Main Menu

Halt On [All Errors]

This field determines which types of errors will cause the system to halt. Configura-

tion options: [All Errors] [No Error] [All but Keyboard] [All but Disk] [All but

Disk/Keyboard]

Installed Memory [XXX MB]

This display-only field displays the amount of conventional memory detected by the

system during bootup. You do not need to make changes to this field.

Language [English]

This allows selection of the BIOS’ displayed language. Currently only English is available.

Supervisor Password [Disabled] / User Password [Disabled]

These fields allow you to set the passwords. To set the password, highlight the appro-

priate field and press <Enter>. Type in a password and press <Enter>. You can type up

to eight alphanumeric characters. Symbols and other keys are ignored. To confirm the

password, type the password again and press the <Enter>. The password is now set to

[Enabled]. This password allows full access to the BIOS Setup menus. To clear the

password, highlight this field and press <Enter>. The same dialog box as above will

appear. Press <Enter> and the password will be set to [Disabled].

A Note about Passwords

The BIOS Setup program allows you to specify passwords in the Main menu. The

passwords control access to the BIOS during system startup. The passwords are not

case sensitive. In other words, it makes no difference whether you enter a password

using upper or lowercase letters. The BIOS Setup program allows you to specify two

separate passwords: a Supervisor password and a User password. When disabled, any-

one may access all BIOS Setup program functions. When enabled, the Supervisor

password is required for entering the BIOS Setup program and having full access to all

configuration fields.

Forgot the Password?

If you forgot the password, you can clear the password by erasing the CMOS Real Time

Clock (RTC) RAM. The RAM data containing the password information is powered by the

onboard button cell battery. To erase the RTC RAM: (1)Unplug your computer; (2)Uncap

the blue jumper cap from default [1-2]; (3)Place the jumper cap onto pins [2-3] to

short the RTC CMOS registry and erase its memory; (4)Uncap the jumpers and

return the cap to the operational default position [1-2]; (5)Turn ON your computer; (6)

Hold down <Delete> during bootup and enter BIOS setup to re-enter user preferences.

P4T-F

P4T-F Clear RTC RAM

Short solder points

to Clear CMOS

CLRTC

Intel I/O

Controller

Hub

(ICH2)

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Asus P4T-F Bedienungsanleitung Seite 57

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motherboards Asus P4T-F