Asus P5BV/SAS Bedienungsanleitung PDF herunterladen (Seite 129)

ASUS P5BV Series 5-31

5.3.1 Creating a RAID 0 set (stripe)

To create a RAID 0 set:

1. From the utility main menu, select

1. Create RAID Volume, then press

<Enter>. This screen appears.

2. Enter a name for the RAID 0 set, then press <Enter>.

3. When the

RAID Level item is highlighted, press the up/down arrow key to

select RAID 0(Stripe), then press <Enter>.

4. When the

Disks item is highlighted, press <Enter> to select the hard disk

drives to congure as RAID. This SELECT DISKS screen appears.

Intel(R)MatrixStorageManagerOptionROMv5.0.0.1032ICH7R

wRAID5

[ CREATE ARRAY MENU ]

[ DISK/VOLUME INFORMATION ]

Enter a string between 1 and 16 characters in length that can be

used

[↑↓]-Change[TAB]-Next[ESC]-PreviousMenu[Enter]-

Name:

RAID Level:

Disks:

StripSize:

Volume0

RAID0(Stripe)

SelectDisks

128KB

0.0 GB

[ SELECT DISKS ]

[↑↓]-Previous/Next[SPACE]-Selects[ENTER]-Selection

PortDriveModelSerial#Size

Status

0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-

RAIDDisk

1 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-

RAIDDisk

5. Use the up/down arrow key to highlight a drive, then press <Space> to

select. A small triangle marks the selected drive. Press <Enter> after

completing your selection.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 183 184

Keine Kommentare

Asus P5BV/SAS Bedienungsanleitung Seite 129