Asus P5BV/SAS Bedienungsanleitung PDF herunterladen (Seite 132)

5-34 Chapter 5: RAID conguration

5.3.3 Creating a RAID 10 set (RAID 10)

To create a RAID 10 set:

1. From the utility main menu, select

1. Create RAID Volume, then press

<Enter>. This screen appears.

2. Enter a name for the RAID 10 set, then press <Enter>.

3. When the

RAID Level item is highlighted, press the up/down arrow key to

select RAID 10(RAID0+1), then press <Enter>.

4 When the

Disks item is highlighted, press <Enter> to select the hard disk

drives to congure as RAID. The SELECT DISKS screen appears.

5 Use the up/down arrow key to highlight a drive, then press <Space> to

select. A small triangle marks the selected drive. Press <Enter> after

completing your selection.

6. When the

Stripe Size item is highlighted, press the up/down arrow key to

select the stripe size for the RAID 10 array, then press <Enter>. The available

stripe size values range from 8 KB to 128 KB. The default stripe size is 64

KB.

Intel(R)MatrixStorageManagerOptionROMv5.0.0.1032ICH7R

wRAID5

[ CREATE ARRAY MENU ]

[ DISK/VOLUME INFORMATION ]

Enter a string between 1 and 16 characters in length that can be

used

Name:

RAID Level:

Disks:

StripSize:

Volume10

RAID10(RAID0+1)

SelectDisks

128KB

XXX.X GB

[↑↓]-Change[TAB]-Next[ESC]-PreviousMenu[Enter]-

TIP: We recommend a lower stripe size for server systems, and a higher stripe

size for multimedia computer systems used mainly for audio and video editing.

7. Key in the RAID volume capacity that you want then press <Enter> when

the Capacity item is highlighted. The default value indicates the maximum

allowed capacity.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 183 184

Keine Kommentare

Asus P5BV/SAS Bedienungsanleitung Seite 132