Asus RS100-E4/PI2 Bedienungsanleitung Seite 53

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 156
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 52
ASUS RS100-E4/PI2 4-1 3
3. Serial ATA connectors (7-pin SATA1, SATA2, SATA3,
SATA4)
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk drives.
If you installed Serial ATA hard disk drives, you can create a RAID 0
and RAID 1 conguration using the Intel
®
Matrix Storage Technology or
the LSI MegaRAID
®
utility embedded in the Intel
®
ICH7R Southbridge.
Serial ATA hard disk drive connection
Conn ector Sett ing Use
SATA1/SATA2 Master Boot disk
SATA3/SATA4 Slave Data disk
These connectors are set IDE mode by default. In IDE mode, you can
connect Serial ATA boot/data hard disk drives to these connectors. If
you intend to create a Serial ATA RAID set using these connectors, set
the Congure SATA as item in the BIOS to [RAID]. See section “4.3.4
IDE Conguration” for details.
Important notes on Serial ATA
Use only two Serial ATA RAID connectors for each RAID 0 or RAID 1
set.
When using the connectors in IDE mode, connect the primary (boot)
hard disk drive to the SATA1 or SATA2 connector. Refer to the table
below for the recommended SATA hard disk drive connections.
P5M2-M/RS100-E4
®
P5M2-M/RS100-E4 SATA Connectors
SATA1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
SATA2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
SATA3
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXP3
RSATA_RXN3
GND
SATA4
GND
RSATA_TXP4
RSATA_TXN4
GND
RSATA_RXP4
RSATA_RXN4
GND
Seitenansicht 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 155 156

Kommentare zu diesen Handbüchern

Keine Kommentare