Asus M4A77T/USB3 Bedienungsanleitung PDF herunterladen (Seite 53)

ASUS M4A77T/USB3 2-15

The Module Version and USB Devices Enabled items show the auto-detected values. If no

USB device is detected, the item shows None.

USB Functions [Enabled]

Enables or disables the USB functions. Conguration options: [Disabled] [Enabled]

USB 2.0 Controller [Enabled]

Enables or disables the USB 2.0 controller. Conguration options: [Disabled] [Enabled]

Legacy USB Support [Auto]

Enables or disables support for Legacy USB storage devices including USB ash drives and

USB hard drives. Setting this item to [Auto] allows the system to detect the presence of USB

devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device

is detected, the legacy USB support is disabled. Conguration options: [Disabled] [Enabled]

[Auto]

USB 2.0 Controller Mode [HiSpeed]

Congures the USB 2.0 controller in HiSpeed (480Mbps) mode or FullSpeed (12Mbps)

mode. Conguration options: [FullSpeed] [HiSpeed]

Plug And Play O/S [No]

When this item is set to [No], BIOS congures all the devices in the system. When this item

is set to [Yes] and if you install a Plug and Play operating system, the operating system

congures the Plug and Play devices not required for boot. Conguration options: [No] [Yes]

Take caution when changing the settings of the PCI PnP menu items. Incorrect eld values

can cause the system to malfunction.

2.4.5 PCIPnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.

The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA

devices and setting the memory size block for legacy ISA devices.

The following items only appear when a USB storage device is plugged in.

USB Mass Storage Device Conguration

USB Mass Storage Reset Delay [20 Sec]

Sets the maximum time that the BIOS waits for the USB storage device to initialize.

Conguration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]

Emulation Type [Auto]

Allows you to set the emulation type. Conguration options: [Auto] [Floppy]

[Forced FDD] [Hard Disk] [CDROM]

2.4.6 USB Conguration

The items in this menu allows you to change the USB-related features. Select an item then

press <Enter> to display the conguration options.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 61 62

Keine Kommentare

Asus M4A77T/USB3 Bedienungsanleitung Seite 53