Asus RX3042H Bedienungsanleitung PDF herunterladen (Seite 23)

RX3042H User's Manual

Quick Start Guide

3 Quick Start Guide

This Quick Start Guide provides basic instructions for connecting

the RX3042H to a computer or a network and to the Internet.

• Part 1 provides instructions to set up the hardware.

• Part 2 describes how to configure Internet properties on your

computer(s).

• Part 3 shows you how to configure basic settings on the

RX3042H to get your LAN connected to the Internet.

After setting up and configuring the device, you can follow the

instructions on page 15 to verify that it is working properly.

This Quick Start Guide assumes that you have already established

ADSL or cable modem service with your Internet service provider

(ISP). These instructions provide a basic conﬁguration that should

be compatible with your home or small ofﬁce network setup. Refer

to the subsequent chapters for additional conﬁguration instructions.

3.1 Part 1 — Connecting the Hardware

In Part 1, you connect the device to an ADSL or a cable modem

(which in turn is connected to a phone jack or a cable outlet), the

power outlet, and your computer or network.

Warning: Before you begin, turn the power off for all

devices. These include your computer(s), your LAN

hub/ switch (if applicable), and the RX3042H.

Figure 3.1 illustrates the hardware connections. Please follow the

steps that follow for speciﬁc instructions.

3.1.1 Step 1. Connect an ADSL or a cable modem

For the RX3042H: Connect one end of the Ethernet cable to the

port labeled WAN on the rear panel of the device. Connect the

other end to the Ethernet port on the ADSL or cable modem.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 128 129

Keine Kommentare

Asus RX3042H Bedienungsanleitung Seite 23