Asus SL1200 Bedienungsanleitung PDF herunterladen (Seite 68)

Chapter 7 - Conguring Routes

ASUS SL1200

Table 7.2. Static Route Conguration Parameters

Field Description

Destination IP Address Species the IP address of the destination computer or

an entire destination network. It can also be specied

as all zeros to indicate that this route should be used

for all destinations for which no other route is dened

(this is the route that creates the default gateway). Note

that destination IP must be a network ID. The default

route uses a destination IP of 0.0.0.0. Refer to 13.1

IP Addresses for more details on IP addresses.

Destination Netmask Indicates which parts of the destination address refer to the

network and which parts refer to a computer on the network.

The default route uses a netmask of 0.0.0.0. Refer to 13.3

Subnet masks for more details on network masks.

Gateway IP Address Gateway IP address

5. To enable or disable RIP passive mode, click the

Enable

Disable

radio button.

6. Select RIP version for sending and receiving routing information from

the respective drop-down list.

7. To enable or disable authentication, click the

Enable

Disable

radio

button. You must also select the RIP authentication mode and enter

authentication key if authentication is enabled.

8. Repeat steps 1 to 5 if you want to congure another interface to support

routing information exchange.

9. Click <

Apply

> to save the RIP conguration.

7.3 Static Routing

7.3.1 Static Route Conguration Parameters

Table 7.2 denes the available conguration parameters for static routing

conguration.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 174 175

Keine Kommentare

Asus SL1200 Bedienungsanleitung Seite 68