Asus E500-PIB Betriebsanweisung PDF herunterladen (Seite 49)

45 • Schlage • Schlage Utility Soware User's Guide

Controller PropertiesAD-Series Locks and Controllers

CT5000

EDIT Tab

Property Description Default

Lock Type Classroom: Unlocks when a credential is presented and then automatically locks aer

the relock delay has expired. The CT5000 can only be Classroom Type.

Classroom

PIN Length Maximum number of digits in the user PIN. Range of 3 to 6 digits. 6

Ignore Keypad If checked, key entry codes are ignored. Disabled

Relock Delay Amount of time before the CT5000 relocks aer being unlocked by a user presenting

a valid credential or the Request to Exit being released.

3 seconds

CT5000-Input

Request to Exit: Active

Open/Active Closed

This sets the polarity of the Request To Exit signal into the CT5000. Default is when

the switch is closed and the CT5000 reads and reports a Request to Exit.

Active close

CT5000-Input

Reader Tamper 1:

Active Open/Active

Closed

This sets the polarity of the Reader 1 Tamper signal into the CT5000. Default is when

the switch is closed and the CT5000 reads and reports a Reader 1 Tamper.

Active close

CT5000-Input

Reader Tamper 2:

Active Open/Active

Closed

This sets the polarity of the Reader 2 Tamper signal into the CT5000. Default is when

the switch is closed and the CT5000 reads and reports a Reader 2 Tamper.

Active close

Door Position Switch

(DPS): Installed

If unchecked, the Door Position Switch (DPS) is disabled and the Door Prop Delay,

Anti-Tailgate, Request to Exit Clears Alarm, and Alarm are also disabled.

By default, the CT5000 assumes there is no Door Position Switch (DPS) connected.

Disabled

Door Position Switch

(DPS): Active Open/

Active Closed

This sets the polarity of the Door Position Switch (DPS) signal into the CT5000

(Open or Closed). Default is when the switch is closed and the CT5000 reads and

reports the door closed.

Active Open

Door Prop Delay The Prop Delay setting is the time to allow the door to be held open before the alarm

relay triggers the alarm.

30 seconds

Door Prop Delay:

Enabled/Disabled

When enabled, the alarm relay will activate aer the door has been open more time

than the number of seconds speciﬁed in the Door Prop Delay time.

Disabled

Anti-Tailgate Anti-Tailgate is designed to automatically relock the door when the door re-closes, no

matter how much time is le on the relock delay (requires a Door Position Switch).

Disabled

Request to Exit Clears

Alarm

During an alarm event, enabling request to exit disables the alarm. Disabled

Alarm Relay:

Normally Open

(Secure)

Normally Closed

(Secure)

When Normally-closed (Secure), the normally-closed side of the relay is the secure

side. (The alarm relay polarity will change as soon as saved, a credential is not

required.)

Normally

Closed

(Secure)

Aux Relay:

Normally Open

(Secure) Normally

Closed (Secure)

When Normally-closed (Secure), the normally-closed side of the relay is the secure

side. (The auxiliary relay polarity will change as soon as saved, a credential is not

required.)

Normally

Closed

(Secure)

Strike Relay:

Normally Open

(Secure)

Normally Closed

(Secure)

When Normally-closed (Secure), the normally-closed side of the relay is the secure

side. (Needs to read a valid credential before changing the relay polarity.)

Normally

Closed

(Secure)

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 86 87

Kommentare zu diesen Handbüchern

Keine Kommentare

Asus E500-PIB Betriebsanweisung Seite 49

Kommentare zu diesen Handbüchern